Klein Insulated Hooded Screw Holding Screwdriver Set, 6 Pieces (85156KINS)

Key Features
Six Tips, One Design
Phillips #1 and #2, square #1 and #2, and 3/16" and 1/4" slotted, all with the same hooded screw holder and 1000V insulation.
Mechanical Screw Holding
A sliding hood grips each screw head so you can start fasteners one-handed near energized parts, no magnet involved.
1000V, ASTM F1505
Orange impact- and flame-resistant insulation meets or exceeds ASTM F1505-16(2021) on every driver.
7" Shanks
Every driver gets a 7-inch round shank for reach into deep boxes and gear.
Tether Holes Throughout
Each handle has an integrated tether hole for work at height.
Overview
The Klein Tools Insulated Hooded Screw Holding Screwdriver Set, 6-Piece (85156KINS) puts six 1000-volt insulated, screw-holding screwdrivers in one purchase. This is an insulated screwdriver set designed for electricians and maintenance crews who drive Phillips, square and slotted screws on or near energized equipment.
Each driver uses Klein's hooded screw-holding design: a sleeve slides forward over the screw head and grips it mechanically, so you can start a screw with one hand in a confined space. Klein went mechanical because magnetism is not dependable on live work. Retract the sleeve and the driver works like any other screwdriver.
The six tips cover the screws electricians actually meet: Phillips #1 and #2, square #1 and #2, and 3/16" and 1/4" slotted. The Phillips #2, square #2 and 1/4" slotted drivers are also sold individually as Klein Cat. Nos. 32216INS, 32214INS and 32215INS.
Every driver carries bright orange impact- and flame-resistant insulation rated for 1000V and meeting or exceeding ASTM F1505-16(2021). Shanks are 7" (17.8 cm) round, and the black rubber Cushion-Grip handles are 4-5/16" (10.9 cm) long and 1-1/4" (3.2 cm) in diameter with a non-slip design for added torque and comfort.
Each handle includes an integrated tether hole for work off ladders, lifts and buckets. The full set weighs 1.7 lb (760 g).
Who should buy it: electricians outfitting an insulated kit, industrial maintenance and utility crews doing energized work, and anyone replacing a mix of magnetic-tip drivers with a matched set that holds screws mechanically.
Every Common Tip Covered
Six drivers handle the Phillips, square and slotted screws you find in devices, panels and equipment.
Phillips #1 and #2
Square #1 and #2
3/16" and 1/4" slotted
Grip the Screw, Not Hope
The sliding sleeve engages the screw holder, letting you start screws one-handed in hard-to-reach spaces.
Hooded mechanical screw holder
Not magnetic
Same operation on all six drivers
Insulated for Energized Work
Impact- and flame-resistant insulation protects against shock while you work near energized sources.
1000V rated
ASTM F1505-16(2021)
High-visibility orange insulation
Comfort and Control
Non-slip Cushion-Grip handles deliver more torque with less fatigue, and every handle can be tethered.
Rubber Cushion-Grip handles
Integrated tether holes
Set weight: 1.7 lb (760 g)
What's in the Box
(1) Phillips #1 insulated screw holding screwdriver
(1) Phillips #2 insulated screw holding screwdriver
(1) Square #1 insulated screw holding screwdriver
(1) Square #2 insulated screw holding screwdriver
(1) 3/16" slotted insulated screw holding screwdriver
(1) 1/4" slotted insulated screw holding screwdriver
Key Specifications
Number of Pieces
6
Tips
Phillips #1, #2; Square #1, #2; Slotted 3/16", 1/4"
Screw Holding
Mechanical hooded sleeve (non-magnetic)
Insulation Rating
1000V
Standard
Shank Length
7" (17.8 cm), round
Handle
Cushion-Grip, rubber, black
Handle Length
4-5/16" (10.9 cm)
Handle Diameter
1-1/4" (3.2 cm)
Tether Point
Integrated tether hole on each driver
Set Weight
1.7 lb (760 g)
Built For
Electrical
Energized Work
Industrial Maintenance
Utility
Commercial Electrical
Panel and Switchgear Work
Tool Nut's Take
A Full Insulated Lineup That Holds the Screw
The Klein Tools Insulated Hooded Screw Holding Screwdriver Set, 6-Piece (85156KINS) covers Phillips, square and slotted with mechanical screw holding and 1000V insulation.
Who it's for: Electricians and maintenance crews building or upgrading an insulated tool kit.
Why it stands out: Six tip sizes in one matched design, each with a hooded screw holder, a 7" shank and a tether hole.
Worth knowing: None of the drivers are magnetic. That is intentional for live work, so do not expect the tips to pick up screws on their own.
Common Questions
Which tips come in the Klein 85156KINS set? Phillips #1 and #2, square #1 and #2, and 3/16" and 1/4" slotted.
How do the screwdrivers hold screws? A hooded sleeve slides over the screw head and grips it mechanically. The tips are not magnetic.
Are they rated for live work? Each driver is insulated to 1000V and meets or exceeds ASTM F1505-16(2021).
Can the drivers be tethered? Yes. Every handle has an integrated tether hole.